Agarwala, M.K., Jamalabad, V.K., Langrana, N.A., Safari, A., Whalen, P.J., Danforth, S.C. (1996), "Structural quality of parts processed by fused deposition", Rapid Prototyping Journal, Vol. 2 No.4, pp.4-19.

(1996), Amoco Polypropylene Homopolymers Bulletin PP-8n, Amoco Polymers, Inc, .

Baird, D.G. (1996), "In situ thermoplastic composites (from Liquid Crystalline Polymers)", in Salamone, J.C. (Eds),Polymeric Materials Encyclopedia, CRC Press, Boca Raton, FL, pp.3207-16.

Baird, D.G., Sukhadia, A. (1993), .

Bhargava, P., Bandyopadhyay, A., Rangarajan, S., Qi. G., Dai, C., Wu, S., Danforth, S.C., Safari, A. (1997), "Shrinkage, weight loss and crack prevention during binder burn out of components produced by fused deposition of ceramics (FDC)", Proceedings of the Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Blizard, K.G., Baird, D.G. (1987), "The morphology and rheology of polymer blends containing a liquid crystalline copolyester", Polymer Engineering and Science, Vol. 27 No.9, pp.653-62.

Cao, M.Y., Wunderlich, B. (1985), "Phase transitions in mesophase macromolecules v. transitions in Poly(oxy-1, 4-phenylene carbonyl-co-oxy-2, 6-naphthaloyl)", Journal Polymer Science: Polymer Physics Edition, Vol. 23 No.3, pp.521-35.

Clancy, R., Jamalabad, V., Whalen, P., Bhargava, P., Dai, C., Rangarajan, S., Wu, S., Danforth, S., Langrana, N., Safari, A. (1997), "Fused deposition of ceramics: progress towards a robust and controlled process for commercialization", Proceedings of the Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Crevecoeur, G., Groeninckx, G. (1990), "Morphology and mechanical properties of thermoplastic composites containing a thermotropic liquid crystalline polymer", Polymer Engineering and Science, Vol. 30 No.9, pp.532-42.

Crockett, R.S., O’Kelly, J., Carvert, P.D., Fabes, B.D., Stuffle, K., Creegan, P., Hoffman, R. (1995), "Predicting and controlling resolution and surface finish of ceramic objects produced by stereodeposition processes", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, pp.17-24..

Dai, C., Qi, G., Rangarajan, S., Wu, S., Langrana, N.A., Safari, A., Danforth, S.C. (1997), "High quality, fully dense ceramic components manufactured using fused deposition of ceramics (FDC)", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Done, D., Baird, D.G. (1987), "The effect of thermal history on the rheology and texture of thermotropic liquid crystalline polymers", Polymer Engineering and Science, Vol. 27 No.11, pp.816-22.

Done, D., Baird, D.G. (1990), "Solidification behavior and recovery kinetics of liquid crystalline polymers", Polymer Engineering and Science, Vol. 30 No.16, pp.989-95.

Gray, R.W. IV (1997), The Effects of Processing Conditions on Thermoplastic Prototypes Reinforced with Thermotropic Liquid Crystalline Polymers, MS thesis, Chemical Engineering, Virginia Polytechnic Institute, .

Gray, R.W. IV, Baird, D.G.,, Bøhn, J.H. (1997), "Effects of processing conditions on thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling", Polymer Composites, .

Guskey, S.M., Winter, H.H. (1991), "Transient shear behavior of a thermotropic liquid crystalline polymer in the nematic state", Journal of Rheology, Vol. 35 No.6, pp.1191-207.

Halpin, J.C. (1976), "The Halpin-Tsai equations: a review", Polymer Engineering and Science, Vol. 16 No.5, pp.344-52.

Handlos, A.A., Baird, D.G. (1995), "Processing and associated properties of in situ composites based on thermotropic liquid crystalline polymers and thermoplastics", Journal Macromolecular Science - Reviews in Macromolecular Chemistry and Physics, Vol. C35 No.2, pp.183-238.

Handlos, A.A., Baird, D.G. (1996a), "Injection molding of microcomposites based on polypropylene and thermotropic liquid crystalline polymers", International Polymer Processing, Vol. XI pp.82-93.

Handlos, A.A., Baird, D.G. (1996b), "Extrusion blow molding of microcomposites based on thermotropic liquid crystalline polymers and polypropylene", Polymer Engineering and Science, Vol. 36 No.3, pp.378-86.

Handlos, A.A., Baird, D.G. (1996c), "Sheet extrusion of microcomposites based on thermotropic liquid crystalline polymers and polypropylene", Polymer Composites, Vol. 17 No.1, pp.73-85.

Hilmas, G.E., Lombardi, J.L., Hoffman, R.A., Stuffle, K. (1996), "Recent developments in extrusion freeform fabrication (EFF) utilizing non-aqueous gel casting formulations", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, pp.443-50..

(1990), Himont Profax Bulletin AP-002, Himont USA, Inc, .

Isayev, A.I. (1996), "Self-reinforced composites Involving liquid-crystalline polymers: overview of development and applications", in Isayev, A.I., Kyu, T., Cheng, S.Z.D. (Eds),Liquid-Crystalline Polymer Systems Technological Advances, American Chemical Society, Washington DC, pp.1-20.

Kohli, A., Chung, N., Weiss, R.A, (1985), "The effect of deformation history on the morphology and properties of blends of polycarbonate and a thermotropic liquid crystalline polymer", Polymer Engineering and Science, Vol. 29 No.9, pp.573-80.

Krishnaswamy, R.K., Baird, D.G., (1997), "Wholly-thermoplastic composites from woven preforms based on nylon-11 fibers reinforced In situ with a hydroquinone-based liquid crystalline polyester", Polymer Composites, .

Lombardi, J.L., Calvert, P.D. (1997), "Extrusion freeforming of nylon 6 materials", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Lombardi, J.L., Hoffman, R.A., Waters, J.A., Popovich, D., Souvenir, C., Boggavarapu, S., Tennison, B. (1997), "Issues associated with EFF & FDM ceramic filled feedstock formulation", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, .

McIntosh, J.J., Danforth, S.C., Jamalabad, V.R. (1997), "Shrinkage and deformation in components manufactured by fused deposition of ceramics", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Qi, G., Dai, C., Rangarajan, S., Wu, S., Danforth, S.C., Safari, A., Dandyopadhyay, A. (1997), "Properties of RU955 Si3N4 filament for fused deposition of ceramics", Proceedings of Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Rangarajan, S., Qi, G., Bandyopadhyay, A., Dai, C., Bharghav, P., Han, J. W., Safari, A., Danforth, S.C. (1997), "FDCability: the role of processing variables", Proceedings of Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Robertson, C.G., Baird, D.G. (1997), "Comparison of two methods for generating composite fibers of polypropylene and a thermotropic liquid crystalline copoly(ester-amide)", International Polymer Processing, .

Robertson, C.G., de Souza, J.P., Baird, D.G. (1996), "Development of in situ reinforced polypropylene fibers for use in formable woven preforms", in Isayev, A.I., Kyu, T., Cheng, S.Z.D. (Eds),Liquid-Crystalline Polymer Systems Technological Advances, American Chemical Society, Washington DC, pp.84-97..

Robertson, C.R. (1995), Processing of Composite Fibers Based on Polypropylene and a Thermotropic Liquid Crystalline Polymer, MS thesis, Chemical Engineering, Virginia Polytechnic Institute, .

Sabol, E.A. (1994), The Development of a Dual Extrusion Blending Process and Composites Based on Thermotropic Liquid Crystalline Polymers and Polypropylene, MS thesis, Chemical Engineering, Virginia Polytechnic Institute, .

Sabol, E.A., Handlos, A.A., Baird, D.G. (1995), "Composites based on drawn strands of thermotropic liquid crystalline polymer reinforced polypropylene", Polymer Composites, Vol. 16 No.4, pp.330-45.

Safari, A., Danforth, S.C., Panda, R.K., McNulty, T.F., Mohammadi, F., Bandyopadhyay, A. (1997), "Processing of novel piezoelectric transducers via SFF", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, .

Viola, G.G., Baird, D.G., Wilkes, G.L. (1985), "The development of molecular orientation and morphological texture in thermoplastic copolyesters", Polymer Engineering and Science, Vol. 25 No.14, pp.888-95.

Yardimci, M.A., Guceri, S.I.,, Danforth, S.C. (1997), "Thermal analysis of fused deposition", Proceedings Solid Freeform Fabrication Symposium, University of Texas at Austin, .