Emerald Login
   

Welcome guest

Article Request:
Influence of steel composition on strain induced corrosion cracking and other types of corrosion

Article Information:

Title:

Influence of steel composition on strain induced corrosion cracking and other types of corrosion

Author(s):

W. Huijbregts, R. Leferink

Journal:

Anti-Corrosion Methods and Materials

Year:

2006

Volume:

53

Issue:

1

Page:

3 - 11


ISSN:

0003-5599


DOI:

10.1108/00035590610637410

Publisher:

Emerald Group Publishing Limited

Document Access:

Existing customers:

Please login above.

Purchase this document:
Price payable: GBP £13.00
plus handling charge of GBP £1.50 and VAT where applicable.
Purchase

Request this document:
Print or e-mail a document request to your librarian.
Request

Reprints & permissions:
Image: Rightslink Request

Abstract:

Purpose – To make clear that C-steel can differ very much in corrosion resistance under practical conditions only because of differences in chemical composition of the steels.

Design/methodology/approach – In the electricity generating industry, “mild” (i.e. “plain carbon”) and low-alloyed steels are used in huge quantities, for instance, in boilers, steam generators, heat recovery boilers and waste incineration boilers. The resistance to strain induced corrosion cracking (SICC) was determined by measuring the “repassivation” behaviour of the steels at freshly ground surfaces with an electrochemical technique. The corrosion current measured with time was used to calculate the cracking rates of a compact tension specimen.

Findings – A correlation was found between chemical composition, corrosion resistance to SICC and experiences under practical conditions. The results of early-published papers on boiler corrosion (testing in FeCl2 solutions), erosion corrosion (testing in wet steam at 20?bar), nitrate stress corrosion cracking (testing in NH4NO3 solutions) and SICC together with those originating from in-service failures, were compiled into a reference database. This paper is a compilation of this work too.

Originality/value – The database and formulas presented make clear there is often a direct correlation between chemical composition of ordinary C-steel and mentioned types of corrosion failures. The paper is of importance to designers, failure analysts and researchers.

Keywords:

Corrosion, Erosion corrosion, Steel, Stress corrosion


Article Type:

Research paper


Article URL:

http://www.emeraldinsight.com/10.1108/00035590610637410

Top