Dechlorination of large marine iron artifact using a novel technique involving impressed current

This paper aims to develop an electrochemical dechlorination method for large objects in a short time, which were for a long time in the sea. Traditionally, in conservation, chlorides are extracted from marine iron artifacts using complete immersion of those objects in alkaline solutions with or without electrolysis. However, these techniques are time-consuming and very costly, especially when applied to large marine artifacts such as cannons and anchors.

An appropriate sponge was chosen based on resistance to NaOH and the rate of exacted chlorides. Application of electrochemical dechlorination in situ and removal of chloride were measured by the scanning electron microscope (SEM)-EDAX method on the corrosion products and by titration of the electrolysis solution. X-ray diffraction (XRD) method is used for identification of corrosion products before and after application of electrochemical chloride extraction.

The electrochemical chloride extraction (ECE) method is applied against the corrosion of reinforced concrete. From the authors’ research, it is obvious that ECE can successfully extract chlorides from dried large metallic objects exported from the sea. The method of ECE removes the majority of chlorides from the metal during conservation treatment so that the application of organic coating will allow the object to remain stable over a long period.

A new methodology was developed for dechlorination of metallic objects exported from the sea in a short time and thus the consumption of chemical reagents was cut down.