Fault tolerant control of a quadrotor using C ₁ adaptive control

The growing use of small unmanned rotorcraft in civilian applications means that safe operation is increasingly important. The purpose of this paper is to investigate the fault tolerant properties to faults in the actuators of an C ₁ adaptive controller for a quadrotor vehicle.

C ₁ adaptive control provides fast adaptation along with decoupling between adaptation and robustness. This makes the approach a suitable candidate for fault tolerant control of quadrotor and other multirotor vehicles. In the paper, the design of an C ₁ adaptive controller is presented. The controller is compared to a fixed-gain LQR controller.

The C ₁ adaptive controller is shown to have improved performance when subject to actuator faults, and a higher range of actuator fault tolerance.

The control scheme is tested in simulation of a simple model that ignores aerodynamic and gyroscopic effects. Hence for further work, testing with a more complete model is recommended followed by implementation on an actual platform and flight test. The effect of sensor noise should also be considered along with investigation into the influence of wind disturbances and tolerance to sensor failures. Furthermore, quadrotors cannot tolerate total failure of a rotor without loss of control of one of the degrees of freedom, this aspect requires further investigation.

Applying the C ₁ adaptive controller to a hexrotor or octorotor would increase the reliability of such vehicles without recourse to methods that require fault detection schemes and control reallocation as well as providing tolerance to a total loss of a rotor.

In order for quadrotors and other similar unmanned air vehicles to undertake many proposed roles, a high level of safety is required. Hence the controllers should be fault tolerant.

Fault tolerance to partial actuator/effector faults is demonstrated using an C ₁ adaptive controller.