To read this content please select one of the options below:

Motion planning for humanoid robot dynamically stepping over consecutive large obstacles

Fayong Guo (Department of Automation, University of Science and Technology of China, Hefei, China)
Tao Mei (Department of Automation, University of Science and Technology of China, Hefei, China)
Minzhou Luo (Department of Automation, University of Science and Technology of China, Hefei, China)
Marco Ceccarelli (Laboratory of Robotics and Mechatronics, University of Cassino and South Latium, Cassino, Italy)
Ziyi Zhao (Institute of Advanced Manufacturing Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Changzhou, China)
Tao Li (Institute of Advanced Manufacturing Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Changzhou, China)
Jianghai Zhao (Institute of Advanced Manufacturing Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Changzhou, China)

Industrial Robot

ISSN: 0143-991x

Article publication date: 21 March 2016

275

Abstract

Purpose

Humanoid robots should have the ability of walking in complex environment and overcoming large obstacles in rescue mission. Previous research mainly discusses the problem of humanoid robots stepping over or on/off one obstacle statically or dynamically. As an extreme case, this paper aims to demonstrate how the robots can step over two large obstacles continuously.

Design/methodology/approach

The robot model uses linear inverted pendulum (LIP) model. The motion planning procedure includes feasibility analysis with constraints, footprints planning, legs trajectory planning with collision-free constraint, foot trajectory adapter and upper body motion planning.

Findings

The motion planning with the motion constraints is a key problem, which can be considered as global optimization issue with collision-free constraint, kinematic limits and balance constraint. With the given obstacles, the robot first needs to determine whether it can achieve stepping over, if feasible, and then the robot gets the motion trajectory for the legs, waist and upper body using consecutive obstacles stepping over planning algorithm which is presented in this paper.

Originality/value

The consecutive stepping over problem is proposed in this paper. First, the paper defines two consecutive stepping over conditions, sparse stepping over (SSO) and tight stepping over (TSO). Then, a novel feasibility analysis method with condition (SSO/TSO) decision criterion is proposed for consecutive obstacles stepping over. The feasibility analysis method’s output is walking parameters with obstacles’ information. Furthermore, a modified legs trajectory planning method with center of mass trajectory compensation using upper body motion is proposed. Finally, simulations and experiments for SSO and TSO are carried out by using the XT-I humanoid robot platform with the aim to verify the validity and feasibility of the novel methods proposed in this paper.

Keywords

Acknowledgements

The work is supported by Natural Science Foundation of Jiangsu province, China (Grant No. BK2012587) and National Nature Science Foundation of China (Grant No. 51405469). The authors would like to thank He Feng, Zhao Ziyi, Zhu Hongbo and Wei Qiang for helping for the experiment.

Citation

Guo, F., Mei, T., Luo, M., Ceccarelli, M., Zhao, Z., Li, T. and Zhao, J. (2016), "Motion planning for humanoid robot dynamically stepping over consecutive large obstacles", Industrial Robot, Vol. 43 No. 2, pp. 204-220. https://doi.org/10.1108/IR-08-2015-0157

Publisher

:

Emerald Group Publishing Limited

Copyright © 2016, Emerald Group Publishing Limited

Related articles