Effect of PCB surface finish on creep properties of lead‐free solder joints
Abstract
Purpose
To provide further knowledge of the effect of solder composition and PCB surface finish on the creep properties of lead‐free SnAgCu solder joints.
Design/methodology/approach
Single‐overlap shear specimens were prepared for the creep testing. The test matrix included three different SnAgCu pastes with hypoeutectic, eutectic, and hypereutectic compositions. An Sn63Pb37 solder paste was used as a reference. The PCB finishes used were NiAu, organic solderability preservative (OSP) and immersion tin. The creep tests were performed at 85 and 105°C using a dead‐weight system.
Findings
According to the results, the SnAgCu solder with eutectic or near‐eutectic composition is the safest choice when the creep behaviour of solder joints is considered. Of the three different PCB surface finishes, immersion tin is the most favourable choice for use with SnAgCu joints when creep is the predominant deformation mechanism in the joints. On the NiAu finish the creep properties of SnAgCu solder joints were significantly weaker in eutectic and hypereutectic SnAgCu joints than on Sn and OSP.
Originality/value
The results can be used to enhance the reliability of SnAgCu joints in demanding conditions, when special attention is paid to the choice of PCB surface finish and SnAgCu solder composition.
Keywords
Citation
Sundelin, J.J., Nurmi, S.T., Lepistö, T.K. and Ristolainen, E.O. (2005), "Effect of PCB surface finish on creep properties of lead‐free solder joints", Soldering & Surface Mount Technology, Vol. 17 No. 4, pp. 3-9. https://doi.org/10.1108/09540910510630377
Publisher
:Emerald Group Publishing Limited
Copyright © 2005, Emerald Group Publishing Limited