To read this content please select one of the options below:

Magnetic model refinement via a perturbation finite element method – from 1D to 3D

Patrick Dular (ACE, Department of Electrical Engineering and Computer Science, University of Liège, Liège, Belgium FNRS, Liège, Belgium)
Ruth V. Sabariego (ACE, Department of Electrical Engineering and Computer Science, University of Liège, Liège, Belgium)
Laurent Krähenbühl (Ampère (UMR CNRS 5005), École Centrale de Lyon, Université de Lyon, Écully, France)

Abstract

Purpose

The purpose of this paper is to develop a sub‐domain perturbation technique for refining magnetic circuit models with finite element (FE) models of different dimensions.

Design/methodology/approach

A simplified problem considering ideal flux tubes is first solved, as either a 1D magnetic circuit or a simplified FE problem. Its solution is then corrected via FE perturbation problems considering the actual flux tube geometry and the exterior regions, that allow first 2D and then 3D leakage fluxes. Each of these sub‐problems requires an appropriate proper volume mesh, with no need of interconnection. The solutions are transferred from one problem to the other through projections of source fields between meshes.

Findings

The developed perturbation FE method allows to split magnetic circuit analyses into subproblems of lower complexity with regard to meshing operations and computational aspects. A natural progression from simple to more elaborate models, from 1D to 3D geometries, is thus possible, while quantifying the gain given by each model refinement and justifying its utility.

Originality/value

Approximate problems with ideal flux tubes are accurately corrected when accounting for leakage fluxes via surface sources of perturbations. The constraints involved in the subproblems are carefully defined in the resulting FE formulations, respecting their inherent strong and weak nature. As a result, an efficient and accurate computation of local fields and global quantities, i.e. flux, MMF, reluctance, is obtained. The method is naturally adapted to parameterized analyses on geometrical and material data.

Keywords

Citation

Dular, P., Sabariego, R.V. and Krähenbühl, L. (2009), "Magnetic model refinement via a perturbation finite element method – from 1D to 3D", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 28 No. 4, pp. 974-988. https://doi.org/10.1108/03321640910959044

Publisher

:

Emerald Group Publishing Limited

Copyright © 2009, Emerald Group Publishing Limited

Related articles