Prediction of local instabilities in open‐loop induction motor drives

Abstract

Purpose

The purpose of this paper is to propose an analytical method for prediction of self‐sustained oscillations that might happen during low‐cost induction motor drive application. This forecast is needed to avoid unwanted oscillations that can be encountered for in fan, compressor and pump drives utilizing open‐loop frequency‐controlled three‐phase induction motor drives.

Design/methodology/approach

The paper presents the model of the induction motor drive system that includes inverter switches dead‐time and allows discontinuous current of front‐end rectifier. Stability analysis of proposed model was performed by tracing the eigenvalues of the overall system matrix.

Findings

Discontinuous rectifier current at light loads and the dead‐time of the inverter switches are the main sources of undesired low‐frequency self‐sustained speed oscillations in open‐loop controlled induction motor drives. The evaluated risk prediction is a function of drive and motor parameters and load level.

Originality/value

The proposed induction motor drive system model highlights the direct connection between the self‐sustained speed oscillations and the system parameters like inverter dead time, dc capacitor values, motor parameters and motor load level. Good accuracy of instability prediction is verified by dynamic simulation and by extensive experimentation.

Citation

Vasić, V.V., Marčetić, D.P., Vukosavić, S.N. and Oros, Đ.V. (2010), "Prediction of local instabilities in open‐loop induction motor drives", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 29 No. 3, pp. 865-884. https://doi.org/10.1108/03321641011028369