Failure analysis of lead‐free solder joints for high‐density packages

Abstract

Failure analyses of the lead‐free and SnPb solder joints of high‐density packages such as the plastic ball grid array and the ceramic column grid array soldered on SnCu hot‐air solder levelling electroless nickel‐immersion gold or NiAu, and organic solderability preservative Entek printed circuit boards are presented. Emphasis is placed on determining the failure locations, failure modes, and intermetallic compound composition for these high‐density packages' solder joints after they have been through 7,500 cycles of temperature cycling. The present results will be compared with those obtained from temperature cycling and finite element analysis.

Citation

Lau, J., Shangguan, D., Castello, T., Horsley, R., Smetana, J., Hoo, N., Dauksher, W., Love, D., Menis, I. and Sullivan, B. (2004), "Failure analysis of lead‐free solder joints for high‐density packages", Soldering & Surface Mount Technology, Vol. 16 No. 2, pp. 69-76. https://doi.org/10.1108/09540910410537345