Development of a Commercial Made‐to‐Measure Garment Pattern System

Abstract

Describes a PC‐based CAD system for producing made‐to‐measure garment patterns which has been developed and implemented in the commercial environment of a bridalwear manufacturer. The software simulates the hand drafting methods of the company while automating pattern production with the following benefits: first, very rapid production of made‐to measure patterns; second, production of patterns which require minimal alteration at first fitting; third, a user friendly interface with very short training period; fourth, the de‐skilling of the pattern cutting procedure so that problems of staff turnover and training are minimal; and fifth, the elimination of human error in pattern cutting. Initial software development concentrated on bodice patterns. Further enhancements included sleeves and skirts and the mixing and matching of these three components of a dress. Cutting layouts were produced using automatic layout algorithms so that the whole procedure from order and measurements entry through pattern drafting and lay‐planning to the final full scale plotting could be carried out automatically. Furthermore, a queuing system allowed several orders previously entered on the computer to be processed in succession without any intervention by an operator. All the company’s styles are now held by the computer, which is in constant use, to the exclusion of the previously used skilled and lengthy hand drafting methods.

Citation

Turner, J.P. (1994), "Development of a Commercial Made‐to‐Measure Garment Pattern System", International Journal of Clothing Science and Technology, Vol. 6 No. 4, pp. 28-33. https://doi.org/10.1108/09556229410066221