Automated manufacture of 3D reinforced aerospace composite structures

Abstract

Purpose

The purpose of this paper is to focus on exploring an innovative combination of cutting‐edge technologies to be implemented within automated processes for composite parts manufacturing. The objective is the design of a production route for components with tailored fibre orientation and ply lay‐up, with improved damage tolerance thanks to through‐the‐thickness reinforcement and integrated health monitoring systems based on optical fibres technology. This study is part of the FP7 project ADVITAC.

Design/methodology/approach

The proposed technologies are described in detail and their compatibility and potential for integration are discussed.A set up for on‐line monitoring of infusion and curing processes of carbon/epoxy laminates preformed by dry fibre placement technology is proposed, and a preliminary study of their mechanical performance is presented. The possibility of reinforcing through‐the‐thickness preforms manufactured with dry slit tapes automatically laid‐up and consolidated by laser heating is investigated.

Findings

Improved knowledge was obtained of interaction/compatibility between the discussed technologies and scope for application.

Research limitations/implications

The paper reports the technical potential and practical feasibility of the proposed integrated production process. Limited quantitative evaluations on the materials performance are provided. The analysis of the technologies involved represents the early outcome of the ongoing ADVITAC project.

Practical implications

This study contributes to the identification of a new generation of composite architecture which allows production cost and weight savings while retaining the level of quality suitable for demanding structural applications, with particular relevance to the aerospace field.

Originality/value

This paper investigates for the first time the practical possibility of designing a single automated process involving dry fibre placement, tufting and optical fibre sensor monitoring for the production of complex composite components.

Citation

Dell'Anno, G., Partridge, I., Cartié, D., Hamlyn, A., Chehura, E., James, S. and Tatam, R. (2012), "Automated manufacture of 3D reinforced aerospace composite structures", International Journal of Structural Integrity, Vol. 3 No. 1, pp. 22-40. https://doi.org/10.1108/17579861211209975