A new approach for describing pitting corrosion of steel bars in concrete

Abstract

Purpose

The purpose of this study is to quantitively characterize pitting or local corrosion of steel bars. Characterization of pitting or local corrosion is important for steel bar corrosion research in concrete, which is still an unsolved problem for the reason that the pitting on corroded steel is distributed irregularly, besides the varied pitting depths. To solve this problem in a certain degree, two parameters were collectively used to find the pitting distribution and pitting depth distribution of corroded steel bar surface.

Design/methodology/approach

Corroded reinforcement bars were subjected to two different corrosive conditions to obtain the profile of the surface of corroded steel bar. The arithmetic mean deviation of the profile, Ra, also a roughness parameter, and the fractal dimension, D, were computed using MATLAB software from the data on corroded steel bar profiles scanned by a profile tester. Statistical analysis was performed to determine the parameters distribution of Ra.

Findings

Ra and D can assist gravimetric technique in defining the degree of pitting corrosion and make further understanding about the characterization of local or pitting corrosion.

Originality/value

Two parameters were collectively used to find the pitting distribution and pitting depth distribution of corroded steel bar surface, while many studies only study the fractal dimension of pitting corrosion. And, the relationship between these two parameters is studied when using them to describing the non-uniformity of pitting corrosion degree. Using these two parameters can much better describe the non-uniform degree of pitting corrosion.

Citation

Guan, X., Miao, L., Li, H. and Ou, J. (2017), "A new approach for describing pitting corrosion of steel bars in concrete", Anti-Corrosion Methods and Materials, Vol. 64 No. 6, pp. 573-579. https://doi.org/10.1108/ACMM-01-2016-1631