Simple and easy-operated method for filtering eco-friendly corrosion inhibitors

Abstract

Purpose

The purpose of this paper was to find a simple and easy-operated method for filtering eco-friendly corrosion inhibitors.

Design/methodology/approach

The molecular structures and atomic electronegativities of the four kinds of natural reagents, iota-Carrageenan, sodium alginate, sodium dodecanesulphonate (SDS) and sodium dodecylbenzene sulfonate were calculated by Gaussian and Natural Bond Orbital, and the corrosion inhibition rates were forecasted by the calculated results. Then, the realistic corrosion inhibition efficiency were confirmed by electrochemical impedance spectroscopy and potentiodynamic polarization tests in 3.5 Wt.% sodium chloride corrosive solutions. At the same time, the function of pefloxacin mesylate (PM) was explored in this paper polarization tests in 3.5 Wt.% sodium chloride corrosive solutions.

Findings

Results showed that the order calculated by the chemical software was correct, and the corrosion inhibition of SDS was the best. Optimum addition of PM not only can reduce microbial corrosion but also can improve the corrosion inhibition by spatial cooperation.

Practical implications

This method can be used to filter eco-friendly corrosion inhibitors quickly. PM can be also used to improve the corrosion inhibition rate of corrosion inhibitors.

Originality/value

The present method to filter corrosion inhibitors was time-consuming, which needed lots of experiments to verify the corrosion inhibitive efficiency. The calculated method was simpler than others, which need complicated calculation process.

Citation

Yang, N., Liao, Q., Li, Q., Zhang, P. and Li, L. (2016), "Simple and easy-operated method for filtering eco-friendly corrosion inhibitors", Anti-Corrosion Methods and Materials, Vol. 63 No. 2, pp. 73-81. https://doi.org/10.1108/ACMM-07-2014-1406