Adhesion of auto-mixed and manual-mixed self-adhesive resin cements to dentin on exposure to long-term high-altitude pressure
Aircraft Engineering and Aerospace Technology
ISSN: 0002-2667
Article publication date: 16 August 2022
Issue publication date: 6 January 2023
Abstract
Purpose
The purpose of this study is to test the shear-bond-strengths of auto-mixed and manual-mixed self-adhesive resin cement to dentin on long-term high-altitude pressure.
Design/methodology/approach
Human molars were embedded in acrylic resin. Sixty composite resin discs were obtained. The composite resin discs were bonded to dentin using hand-mixed and auto-mixed self-adhesive resin cement. After cementation, the samples were stored in artificial saliva and divided into two subgroups (n = 30), hypobaric pressure and the atmospheric pressure group. The specimen underwent three pressure cycles per day for 100 days. The failure types were evaluated after debonding with scanning electron microscopy. The shear bond strength was tested with Universal Testing Machine. Analysis of variances/Tukey post hoc tests were used for statistical analysis. Groups were also evaluated by the Weibull modulus.
Findings
Regardless of hypobaric pressure changes, the highest bond strength was examined in auto-mixed Panavia SA samples. A significant difference was found in both auto-mixed MaxCem EC and hand-mixed RelyX U200 group after exposure to hypobaric pressure compared to the control group.
Originality/value
The luting cement-type, mixing methods of cements and environmental pressure changes significantly influence the bond strengths. Dentists can use auto-mixed self-adhesive resins in patients likely to be exposed to hypobaric pressure.
Keywords
Acknowledgements
The authors thank “Advanced Material Technologies Applications and Research Center” (Osmangazi University, Eskisehir, Turkey) for their support and contribution and Dr Tugrul Onturk for his contribution in taking microscopic images.
Funding: This research received no specific grant from any funding agency in public, commercial or not-for-profit sectors.
Conflict of interest: The authors declare that they have no conflict of interest
Ethics: The Institutional Ethics Committee approved the study protocol (Osmangazi University Ethical Committee, Eskisehir, Turkey/E- 25403353-050.99-183437).
Citation
Ozkan Ata, S., Akay, C., Mumcu, E. and Ata, N. (2023), "Adhesion of auto-mixed and manual-mixed self-adhesive resin cements to dentin on exposure to long-term high-altitude pressure", Aircraft Engineering and Aerospace Technology, Vol. 95 No. 2, pp. 323-331. https://doi.org/10.1108/AEAT-03-2022-0069
Publisher
:Emerald Publishing Limited
Copyright © 2022, Emerald Publishing Limited