The effect of environmental pressure changes on the bond strength between zirconia ceramic and adhesive resin cement

Abstract

Purpose

The purpose of this study was to investigate the effect of the environmental pressure changes on the bond strength between zirconia ceramics and adhesive resin cement.

Design/methodology/approach

In total, 40 rectangular-shaped zirconium-oxide ceramic specimens were prepared. For surface modification, all zirconia specimens were sandblasted with 50 μm alumina particles. The composite resin discs were bonded to modified zirconia surfaces with resin cement. The specimens were divided into four groups; hyperbaric, hypobaric, hyperbaric + hypobaric and control group. The specimen underwent pressure cycles for 30 days. The shear bond strength test was performed by using the universal testing machine, and failures of the debonded samples were examined with scanning electron microscopy and light microscope.

Findings

No significant difference in bond strength was found between the hyperbaric, hypobaric and control groups after 30 days (p > 0.05). However, there was a significant difference in the hyperbaric + hypobaric group compared to the control group (p = 0.022). Also, the Weibull modulus was highest in control group and lowest in the hyperbaric + hypobaric group.

Originality/value

Barometric changes due to flying followed by diving may have an adverse effect on the retention of zirconia ceramics. Care should be taken in the selection of materials for dental treatment of people who are exposed to environmental pressure changes.

Citation

Ozkan Ata, S., Akay, C. and Ata, N. (2022), "The effect of environmental pressure changes on the bond strength between zirconia ceramic and adhesive resin cement", Aircraft Engineering and Aerospace Technology, Vol. 94 No. 8, pp. 1336-1343. https://doi.org/10.1108/AEAT-11-2021-0336