To read this content please select one of the options below:

Design and performance analysis of novel multiphase induction motor with die-cast copper rotors using FEA for electric propulsion vehicles applications

Sathishkumar Kaliyavarathan (Department of Electrical and Electronics Engineering, Sathyabama University, Chennai, India)
Sivakumaran T.S. (Department of Electrical and Electronics Engineering, Sasurie Academy of Engineering, Coimbatore, India)

Circuit World

ISSN: 0305-6120

Article publication date: 6 April 2020

Issue publication date: 7 October 2020

171

Abstract

Purpose

The purpose of this paper is to study the development of novel multiphase induction motor (MPIM) with copper die cast rotor in the drive system of electric propulsion vehicles (EPV). It is estimated that the manufacturers are concerned about high torque,Efficiency, motor life, energy conservation and high thermal tolerance. To ensure maximum torque and efficiency with multiphase winding and copper die cast technology to increasing high thermal tolerance, life, energy conversations. On other hand, it is very important of EPV application.

Design/methodology/approach

The focus of the investigation is threefold: the modified method carried out on MPIM both stator and rotor can overcome the current scenario problem facing by electric vehicles manufacture and developed perfect suitable electric motor for EPV applications. The design and simulation carried out finite element method (FEM) that was more accurate calculations. Finally developed prototype model of MPIM with copper die cast are discussed with conventional three phase Die casting Induction motor.

Findings

The paper confirmed the multiphase copper die-cast rotor induction motor (MDCrIM) is providing better performance than conventional motor. Proposed motor can bring additional advantage like heat tolerances, long life and energy conversations.

Originality/value

The experiments confirmed the MDCIM suitable for EPV Applications. The modified MDCIM of both stator and rotor are giving better result and good performance compared to conventional method.

Keywords

Citation

Kaliyavarathan, S. and T.S., S. (2020), "Design and performance analysis of novel multiphase induction motor with die-cast copper rotors using FEA for electric propulsion vehicles applications", Circuit World, Vol. 46 No. 4, pp. 271-280. https://doi.org/10.1108/CW-08-2019-0106

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles