On the forced convective flow inside thermal collectors enhanced by porous media: from macro to micro-channels

Abstract

Purpose

Aiming at finding the velocity distribution profile and other flow characteristic parameters such as the Poiseuille (Po) number, this study aims to focus on the three-dimensional forced convective flow inside rectangular ducts filled with porous media commonly used in air-based solar thermal collectors to enhance the thermal performance. The most general model for the fluid flow (i.e. the non-linear Darcy–Brinkman–Forchheimer partial differential equation subjected to slip and no-slip boundary conditions) is considered.

Design/methodology/approach

The general governing equations are solved analytically based on the perturbation technique and the results are validated against numerical simulation study based on a finite-difference solution over a non-uniform but structured grid.

Findings

The analytical velocity distribution profile based on exponential functions for the above-mentioned general case is obtained, and accordingly, expressions for the Po are introduced. It is found that the velocity distribution tends to be uniform by increasing the aspect ratio of the duct. Moreover, a criterion for considering/neglecting the nonlinear drag term in the momentum equation (i.e. the Forchheimer term) is proposed. According to the sensitivity analysis, results show that the nonlinear drag term effects on the Nusselt number are important only in porous media with high Darcy numbers.

Originality/value

A general analytic solution for three-dimensional forced convection flows through rectangular ducts filled with porous media for the general model of Darcy–Brinkman–Forchheimer and the general boundary condition including both no-slip and slip-flow regimes is obtained. An analytic expression to calculate Po number is obtained which can be practical for engineering estimations and a basis for validation of numerical simulations. A criterion for considering/neglecting the nonlinear drag term in the momentum equation is also introduced.

Citation

Dehghan, M., Azari Nesaz, Z., Pourrajabian, A. and Rashidi, S. (2021), "On the forced convective flow inside thermal collectors enhanced by porous media: from macro to micro-channels", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 31 No. 8, pp. 2462-2483. https://doi.org/10.1108/HFF-11-2020-0722