To read this content please select one of the options below:

Experimental and numerical analysis of heat transfer in the helically coiled heat exchanger

Tomasz Sobota (Department of Thermal Power Engineering, Cracow University of Technology, Cracow, Poland)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 7 June 2019

Issue publication date: 22 May 2020

241

Abstract

Purpose

The knowledge of the heat transfer coefficient is important for the proper design of heat exchangers as well as for the determination of the working medium outlet temperatures. This paper aims to present a method of simultaneous determination of coefficients in correlation formulas for the Nusselt number on both sides of the heat transfer surface.

Design/methodology/approach

The idea of the developed method is based on determining such a values of the coefficients in Nusselt number correlations that fulfill the condition of equality between the measured and calculated temperature at the outlet of heat exchanger in terms of least squares method. To test the proposed method, a special experimental installation was built. The heat transfer in helically coiled tube-in-tube heat exchanger was examined for the wide range of temperature changes and volumetric flow rates of working fluid.

Findings

The simulation results were validated with an experimental data. The results show that the heat transfer coefficient of the counter-current is higher than the co-current flow in helically coiled heat exchanger. This phenomenon can be beneficial particularly in the laminar flow regime.

Research limitations/implications

The correlation for the Nusselt number as a function of the Reynolds and Prandtl numbers for hot and cold liquid was obtained with the least squares method for the experimental data.

Practical implications

The presented method allows for the simultaneous determination of heat transfer coefficient on both sides of the wall without the necessity of indirect calculation of the overall heat transfer coefficient. The presented method can be used in the thermal design of various type heat exchangers.

Originality/value

This work presents the new methodology of determination correlations for the helically coiled tube-in-tube heat exchanger for co-current and counter-current arrangement, which can be used in thermal design.

Keywords

Citation

Sobota, T. (2020), "Experimental and numerical analysis of heat transfer in the helically coiled heat exchanger", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 30 No. 6, pp. 2935-2951. https://doi.org/10.1108/HFF-12-2018-0793

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles