Study on the joint mechanical properties of steel structure buildings

Abstract

Purpose

The main supporting frame of steel structure buildings is steel, and the beam-column joints of the steel structure directly affect the stability and strength of the supporting frame.

Design/methodology/approach

This paper briefly introduced the beam-column joints which are used for ensuring the stability of buildings in the steel structure building, selected the fabricated beam-column joints which were different from the traditional welding methods, tested the fabricated beam-column joints with the reaction frame and jack and detected the influence of the thickness and length of the splice plate on the mechanical properties of joints.

Findings

The results showed that the joint stress and the displacement in the vertical direction increased under greater load no matter which kind of fabricated joint was used; under the same load, the thickness and length of the splice significantly affected the mechanical properties of joints, and the larger the thickness and length, the smaller the joint stress and displacement in the vertical direction.

Originality/value

To sum up, increasing the thickness or length of the splice plate of the fabricated joint can effectively improve the mechanical properties of joints.

Citation

Chen, J. (2021), "Study on the joint mechanical properties of steel structure buildings", International Journal of Building Pathology and Adaptation, Vol. 39 No. 4, pp. 655-665. https://doi.org/10.1108/IJBPA-07-2020-0055