To read this content please select one of the options below:

In-situ coated of Ag, ZnO, Ag/ZnO composite nano particles to the technical fiber by hydrothermal method

Demet Kucuk (Department of Textile Engineering, The University of Kahramanmaras Sutcu Imam, Kahramanmaras, Turkey.)
Onur Balci (Department of Textile Engineering, The University of Kahramanmaras Sutcu Imam, Kahramanmaras, Turkey.)
Mustafa Tutak (Department of Textile Engineering, The University of Kayseri Erciyes, Kayseri, Turkey.)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 6 June 2016

389

Abstract

Purpose

Nowadays, the usage of antibacterial textiles is very popular for different type of textiles. The silver (Ag) and zinc oxide (ZnO) are the most popular materials in order to improve antibacterial properties of textiles. The purpose of this paper is to investigate the possibility to produce Ag nanoparticle (NP), ZnO NP, Ag/ZnO NP composite materials in this experimental study.

Design/methodology/approach

It was investigated whether it was possible to produce Ag NP, ZnO NP, Ag/ZnO NP composite materials by hydrothermal method which was known as in-situ approach on the fiber. In addition, the colloidal silver (Ag+) was produced by electrolysis method, and used instead of process water which was necessary during generating of NPs on the fiber by this method. After whole applications, the samples were characterized by SEM, XRD, EDX analyses and the antibacterial activity of specimens was tested according to the ASTM E 2149-01 (gram-negative Escherichia coli). In addition, the resistance to the repeated washes of these antibacterial samples was investigated.

Findings

The production of NPs on the fiber was achieved. The results showed that the samples had sufficient antibacterial activity and this activity did not reduce depending on repeated washing treatments.

Research limitations/implications

Because of usage of one type of fiber, it would be necessary to make researches on the different type of fiber, testing procedure (with different bacteria), washing replications and prescriptions.

Practical implications

During the process the temperature control is very important for the produced fiber. In addition chosen antibacterial test method is crucial for the testing of activity of product. Fiber must be washed at least once to remove unfixed NPs on the fiber.

Originality/value

The technical antibacterial polyester fiber was in-situ coated by hydrothermal method with Ag, ZnO, Ag/ZnO composite NPs.

Keywords

Citation

Kucuk, D., Balci, O. and Tutak, M. (2016), "In-situ coated of Ag, ZnO, Ag/ZnO composite nano particles to the technical fiber by hydrothermal method", International Journal of Clothing Science and Technology, Vol. 28 No. 3, pp. 340-367. https://doi.org/10.1108/IJCST-03-2016-0033

Publisher

:

Emerald Group Publishing Limited

Copyright © 2016, Emerald Group Publishing Limited

Related articles