To read this content please select one of the options below:

Study on the functional relationship between pressure and displacement with time for waist of elastic legwear using FEM

Rui Dan (College of Textiles and Clothing, Qingdao University, Qingdao, China) (Collaborative Innovation Center for Eco-Textiles of Shandong Province, Qingdao, China) (Research Institute of Ecological Textile Technology Innovation of Qingdao University, Qingdao, China)
Yujie Zheng (College of Textiles and Clothing, Qingdao University, Qingdao, China)
ZhiQin Liu (College of Textiles and Clothing, Qingdao University, Qingdao, China)
Zhen Shi (College of Textiles and Clothing, Qingdao University, Qingdao, China) (Collaborative Innovation Center for Eco-Textiles of Shandong Province, Qingdao, China) (Research Institute of Ecological Textile Technology Innovation of Qingdao University, Qingdao, China)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 7 August 2023

Issue publication date: 5 September 2023

57

Abstract

Purpose

The inward displacement perpendicular to the body surface produced by compression garment is an important index to evaluate pressure comfort and optimal design of tight clothing products. The purpose of this study is to explore the pressure distribution state at waist position of elastic legwear and then to solve the common problem of excessive pressure or easy slippage for waist of elastic legwear.

Design/methodology/approach

In this paper, the authors obtained the waist cross-section model of human body using CT scanning and mimics modeling and then simulated the pressure and displacement distribution after wearing sample four elastic legwear using finite element method. The dressing process of elastic legwear was divided into six periods (instantaneous, 1, 2, 4, 8 and 12 h) in this study, and the finite element software ANSYS was used to simulate the displacement and deformation of the waist cross section. The authors finally obtained the functional relationship between pressure/displacement ratio and angle using curve fitting.

Findings

In this paper, the authors obtained the functional relationship between pressure/displacement ratio and angle using curve fitting. Comparison found that the “pressure/displacement–angle” function curve showed an almost consistent trend at any time. That was to say, when the human body was in the state of clothing pressure, the corresponding displacement value of the human body can be calculated by the curve equation under the premise of known pressure value.

Originality/value

This study solves the difficult problem which hard to measure displacement values by conventional methods due to the small deformation of the human body after dressing the compression garment. Conclusions also provide a theoretical reference for evaluating pressure comfort and optimizing clothing structure for the elastic legwear, and this method is also applicable to other types of compression garment.

Keywords

Acknowledgements

This work is supported by the project of Natural Science Foundation of Shandong Province (Grant No. ZR2019PEE022).

Citation

Dan, R., Zheng, Y., Liu, Z. and Shi, Z. (2023), "Study on the functional relationship between pressure and displacement with time for waist of elastic legwear using FEM", International Journal of Clothing Science and Technology, Vol. 35 No. 5, pp. 754-765. https://doi.org/10.1108/IJCST-06-2022-0074

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles