Investigation of chest girth and height variation affecting other body dimensions for men’s upper body clothes pattern grading

Abstract

Purpose

The purpose of this paper is to investigate the chest girth and height related to men’s upper body dimensions to develop men’s grading system for semi-customized clothing.

Design/methodology/approach

A data set of the 3,012 men between the age group of 18 and 59 years from 6th Size Korea was used in this study. The men’s upper body dimensions were tested in terms of five horizontal lengths, seven circumferences and seven vertical lengths. Experiment and data analysis were carried out with two methods: one is multiple linear regression with chest girth and height as each independent variable and the other is calculating variation among chest girth size groups and height size groups, respectively.

Findings

Regression analysis showed that some horizontal lengths are affected not only by chest girth, but also by height, and some vertical lengths are affected not only by height, but also by chest girth. In variation analysis it was found that the variation value for each part of the body is different and it was observed that with an increase in chest girth vertical length also increases. In variation analysis of height, it is found that some horizontal body dimensions and hip girth increase with an increase in height. In the comparison of upper body dimension variation among height groups with the size based on the chest girth, we found that a tall person who already has long vertical length is less affected by the increase in dimensions by increases in their horizontal girth than a short person.

Originality/value

The findings showed detailed numerical body shape changes according to chest girth and height, and it may be used as the basis for determining pattern grading values by chest girth or height.

Citation

Han, H. (2019), "Investigation of chest girth and height variation affecting other body dimensions for men’s upper body clothes pattern grading", International Journal of Clothing Science and Technology, Vol. 31 No. 3, pp. 415-430. https://doi.org/10.1108/IJCST-07-2018-0098