To read this content please select one of the options below:

Analysis of human body surface shape using parametric design method

Sungmin Kim (Graduate School of Polymer Science and Engineering, Chonnam National University, Gwangju, South Korea.)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 1 June 2015

484

Abstract

Purpose

The purpose of this paper is to analyze automation of body surface shape.

Design/methodology/approach

Numerous body landmarks are detected automatically. Body surface can be subdivided into multiple patches in a consistent manner using parametric design method.

Findings

Complex surface shape of various human bodies can be analyzed easily and consistently.

Research limitations/implications

The proposed method may not be applicable for a body with the shape which significantly differs from that of an average body.

Practical implications

This method can greatly reduce the time required to analyze the surface shape of a three dimensional body scan data.

Originality/value

The analysis of body surface shape is one of the most important processes especially in designing close fitting garments. The parametric design of body surface patches will facilitate the analysis of numerous body scan data.

Keywords

Citation

Kim, S. (2015), "Analysis of human body surface shape using parametric design method", International Journal of Clothing Science and Technology, Vol. 27 No. 3, pp. 434-446. https://doi.org/10.1108/IJCST-08-2014-0096

Publisher

:

Emerald Group Publishing Limited

Copyright © 2015, Emerald Group Publishing Limited

Related articles