To read this content please select one of the options below:

Adaptivity of pattern making methods to garments for varying body dimensions

KyoungOk Kim (Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Ueda, Japan)
Chinami Fujii (Graduate School of Science and Technology, Shinshu University, Ueda, Japan)
Masayuki Takatera (Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Ueda, Japan)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 15 August 2019

Issue publication date: 8 August 2019

329

Abstract

Purpose

To suggest a garment for a wider market, the purpose of this paper is to assess the appearance of garments manufactured by a combination of four methods of flat pattern making and four dress forms from different countries. The paper also compares Japanese and British women’s evaluations of these garments’ appearances.

Design/methodology/approach

The authors made 16 garments by combining 4 pattern making methods with measurements from 4 dress forms and evaluated their appearance. The four dress forms were from Japan (Kiiya, called “Kii”), France (Siegel & Stockman, called “St”), the UK (Kennett & Lindsell, called “KL”) and the USA (Wolf Form, called “Wo”), and the four pattern making methods were from Japan (Bunka), Italy (Secoli), France (ESMOD) and the USA (Fashion Institute of Technology, called “FIT”). The authors captured 64 sets of pictures of the 16 garments with the 4 dress forms from the front and the side. The authors then showed images of the four garments made using the same pattern making method with measurements from the four dress forms to subjects for assessment. The subjects – 15 Japanese and 11 British women in their 20s – ranked the pictures in descending order of appearance.

Findings

Subjects from both countries rated garments manufactured using the Bunka and Secoli pattern making methods with the Kii and KL dress forms, and those made using ESMOD and FIT with St and Wo as the highest, even though the dress forms used for pattern making and those for wearing were not coincident. On the contrary, many garments made using Bunka and Secoli with St and Wo, and those made using ESMOD and FIT with Kii and KL were rated lowest in terms of appearance, even though the target dress form and wearing dress form were coincident. Therefore, there are appropriate body measurements for each pattern making method that can render the relevant garment more attractive, likely because these measurements are derived from assumed body proportions in the pattern making method of each country.

Originality/value

Although the evaluation of the appearance of garments is an important factor in garment manufacture, scant research has addressed this issue. Moreover, the comparison between Japanese and British women provided here will help manufacturers make garments that are more attractive to people in both countries.

Keywords

Citation

Kim, K., Fujii, C. and Takatera, M. (2019), "Adaptivity of pattern making methods to garments for varying body dimensions", International Journal of Clothing Science and Technology, Vol. 31 No. 4, pp. 475-486. https://doi.org/10.1108/IJCST-09-2018-0113

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles