Risk-based reliability assessment and testing stop time based software system modeling

Abstract

Purpose

The ideology of this article is to study the performance concerns of SDN Controllers, with the help of developed SRGM and thereby obtain its optimal testing duration. The effect of undetected uncertainty in the parameter values have also been catered in the proposal.

Design/methodology/approach

These uncertainties in the parameter values are studied as the risk of not meeting desired set of requirements, whose removal causes additional cost. Considering these two constructs as attributes of MAUT, the controller's optimal testing duration is obtained.

Findings

The article focuses towards obtaining the optimal duration for which the SDN Controllers must be tested. It was observed that the inculcation of risk-attribute has provided the higher utility value as compared to any other existing scenarios.

Originality/value

Plenty of SRGM have been proposed in the literature which talks about the testing stop time determination problems. But, none of them have considered the impact of risk of not meeting the requirements (reliability) along with cost to obtain its testing stop time. Further, validation of the proposed model in presented with the help of two releases versions of SDN controller platform, ONOS, entitled as “Kingfisher” and “Loon” and has acquired promising results.

Citation

Gupta, P., Anand, A., Tamura, Y. and Ram, M. (2023), "Risk-based reliability assessment and testing stop time based software system modeling", International Journal of Quality & Reliability Management, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/IJQRM-06-2022-0186