Modelling and performance improvement of an annular grooved thrust air bearing

Abstract

Purpose

This paper aims to combine the grooves with an annular air thrust bearing with multi-hole restrictors and discusses the influence of the groove parameters on the bearing performance.

Design/methodology/approach

Four models of aerostatic bearings with grooves of different geometries are established. The pressure distribution, load-carrying capacity (LCC), stiffness and flow characteristics of the flow field in the bearing clearances are obtained by computational fluid dynamics simulation.

Findings

The numerical and simulation results show that air bearing with grooved restrictors can slow down the pressure drop at the air inlet and increase the LCC and stiffness of the bearing. The gas flow in the aerostatic bearing is also studied, and the air vortex in the recess is analyzed.

Originality/value

This research optimizes the structure of the annular air thrust bearing, analyzes the gas vortex in the recess, improves the LCC and stiffness of the bearing and provides a reference for the bearing in the selection of groove parameters.

Peer review

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2023-0006/

Citation

Chen, Y., Huo, D., Wang, G., Zhong, L. and Gong, Z. (2023), "Modelling and performance improvement of an annular grooved thrust air bearing", Industrial Lubrication and Tribology, Vol. 75 No. 10, pp. 1116-1124. https://doi.org/10.1108/ILT-01-2023-0006