Experimental study of wear for implant materials under dry sliding conditions

Abstract

Purpose

Artificial biomaterials are implanted to the human body to support the structure depending upon the extent of deformity or damage. This paper aims to formulate an experimental approach to assess the suitability of materials that can be used in the manufacture of human implants.

Design/methodology/approach

Five different pin materials such as SS304, Alumina, HDPE, UHMWPE and Brass have been chosen to be suitable for implants. The tribological properties of the aforementioned materials have been tested on a simple pin-on-disc apparatus. EN31 was chosen as the disc material because its hardness value is much higher than that of the pin materials used. The test materials were constructed in the form of spherical end pins to have point contacts and to reduce the depth of wear.

Findings

It has been observed that the polymeric (HDPE and UHMWPE) and ceramic materials (Alumina) are much better than the traditional metallic materials. The wear rate is very low for these materials owing to their self-lubricating properties.

Practical implications

The experimental studies will help predict the performance and life of implant materials in the human body.

Originality/value

In most cases, SS316L that possesses nickel compositions is used as the disc material; SS316L is toxic to the human body. In the present study, a high carbon alloy steel with high degrees of hardness EN31 is used as a disc counter-face material.

Citation

Mojumder, S., Sikdar, S. and Ghosh, S.K. (2017), "Experimental study of wear for implant materials under dry sliding conditions", Industrial Lubrication and Tribology, Vol. 69 No. 6, pp. 828-832. https://doi.org/10.1108/ILT-04-2016-0079