Effects of surface texturing on the tribological behavior of piston rings under lubricated conditions
Abstract
Purpose
The piston ring-cylinder liner pair is one of the most important tribological systems of an internal combustion engine. The friction loss of the piston ring-cylinder liner pair accounts for the largest portion of total efficiency losses. Therefore, improving the tribological system design of the piston ring-cylinder liner pair can reduce friction losses and bring tremendous economic benefits to society. This paper aims use surface texturing, which is proving to be an effective method, for improving the tribological performance of sliding surfaces.
Design/methodology/approach
In this paper, an experimental study using a pin-on-disk tribometer was carried out to evaluate the effects of surface texturing on friction reduction of piston rings under various loads and sliding velocities. Rectangular- and circular-shaped textures with different depths and area densities were produced by a Femtosecond laser. Comparison experiments were conducted with un-textured rings.
Findings
The results indicate that the friction performance of the ring surface was significantly improved by surface texturing, and the running-in stage was also shortened. More specifically, it was found that the rectangular-shaped texture had a better effect on friction reduction than the circular-shaped texture. Results also indicate that an optimum texture density existed for the rectangular-shaped texture. Additionally, it was observed that the average friction coefficient reduction of the textured ring decreased with increasing load and increased with increasing sliding velocity.
Originality/value
Consequently, these findings provide a more in-depth understanding of the relationship between micro-textures and tribological properties of piston rings in lubricating sliding.
Keywords
Acknowledgements
This work was supported by China Postdoctoral Science Foundation funded project (Grant No. 201003672).
Citation
Zhang, Y., Zhang, X., Wu, T. and Xie, Y.-b. (2016), "Effects of surface texturing on the tribological behavior of piston rings under lubricated conditions", Industrial Lubrication and Tribology, Vol. 68 No. 2, pp. 158-169. https://doi.org/10.1108/ILT-05-2015-0063
Publisher
:Emerald Group Publishing Limited
Copyright © 2016, Emerald Group Publishing Limited