Stability analysis of mobile cranes and determination of outriggers loading

Abstract

Purpose

The purpose of this paper is to develop mathematical tools that are reliable and easily implementable in computer codes, which address the determination of the outriggers reaction of mobile cranes and the monitoring of the actual stability margin available during lift operations.

Design/methodology/approach

An algorithm that determines the load transmitted to the ground by a mobile crane with four outriggers has been developed. Static theory of rigid body is adopted for the development of the algorithm and the static indeterminancy, due to the presence of more than three outriggers, is eluded through the adoption of specific hypotheses. An analysis of crane stability is also performed, and a method to monitor the actual stability behavior during lift operations is suggested.

Findings

A case study is proposed to test the algorithm and outcomes show a good matching with the actual outriggers reaction measured during a test conduct in situ. Two indices are introduced as a measure of the stability margin.

Research limitations/implications

The method developed accounts only for gravitational forces statically applied. Future works should be addressed to extend the model to the effect of wind and inertial forces.

Practical implications

This paper supplies a reliable tool to assess, in the design phase of a lifting operation, the compliance between bearing capacity of the ground and loads transmitted by outriggers. The method proposed for the analysis of the stability behavior is suitable for the development of an anti-upset device.

Originality/value

This study contributes to efforts to increase safety during lifting operations with mobile cranes. The method proposed is applicable to cranes with any geometry of the outriggers pattern and is extensible to a number of outriggers greater than four. Furthermore, the evaluation of the measure in real time of the stability margin, is not affected by the data entered by the crane’s operator with the consequence that human factor does not affect this measure.

Citation

Romanello, G. (2018), "Stability analysis of mobile cranes and determination of outriggers loading", Journal of Engineering, Design and Technology, Vol. 16 No. 6, pp. 938-958. https://doi.org/10.1108/JEDT-05-2018-0084