To read this content please select one of the options below:

Assessment of critical parameters affecting the behaviour of bearing reinforced concrete walls under fire exposure

Maha Assad (Department of Civil Engineering, American University of Sharjah, Sharjah, United Arab Emirates)
Rami Hawileh (Department of Civil Engineering, American University of Sharjah, Sharjah, United Arab Emirates)
Ghada Karaki (School of Engineering, University of the West of England, Bristol, UK)
Jamal Abdalla (Department of Civil Engineering, American University of Sharjah, Sharjah, United Arab Emirates)
M.Z. Naser (Glenn Department of Civil Engineering, Clemson University, Clemson, South Carolina, USA)

Journal of Structural Fire Engineering

ISSN: 2040-2317

Article publication date: 27 November 2023

55

Abstract

Purpose

This research paper aims to investigate reinforced concrete (RC) walls' behaviour under fire and identify the thermal and mechanical factors that affect their performance.

Design/methodology/approach

A three-dimensional (3D) finite element (FE) model is developed to predict the response of RC walls under fire and is validated through experimental tests on RC wall specimens subjected to fire conditions. The numerical model incorporates temperature-dependent properties of the constituent materials. Moreover, the validated model was used in a parametric study to inspect the effect of the fire scenario, reinforcement concrete cover, reinforcement ratio and configuration, and wall thickness on the thermal and structural behaviour of the walls subjected to fire.

Findings

The developed 3D FE model successfully predicted the response of experimentally tested RC walls under fire conditions. Results showed that the fire resistance of the walls was highly compromised under hydrocarbon fire. In addition, the minimum wall thickness specified by EC2 may not be sufficient to achieve the desired fire resistance under considered fire scenarios.

Originality/value

There is limited research on the performance of RC walls exposed to fire scenarios. The study contributed to the current state-of-the-art research on the behaviour of RC walls of different concrete types exposed to fire loading, and it also identified the factors affecting the fire resistance of RC walls. This guides the consideration and optimisation of design parameters to improve RC walls performance in the event of a fire.

Keywords

Citation

Assad, M., Hawileh, R., Karaki, G., Abdalla, J. and Naser, M.Z. (2023), "Assessment of critical parameters affecting the behaviour of bearing reinforced concrete walls under fire exposure", Journal of Structural Fire Engineering, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/JSFE-07-2023-0029

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles