Optimization of spray drying conditions for the production of quality ber (Zizyphus mauritiana Lamk.) fruit powder

Abstract

Purpose

To overcome the need of seasonal fruit ber, consumers prefer to use fruits in such a form that can be prepared easily or consumed instantly. By transforming them into powders, they can be effortlessly attained as well as preserved, stored and processed.

Design/methodology/approach

To optimize the spray drying conditions for development of ber fruit powder, response surface methodology was used. The experimental design consisted of 13 runs. The levels of independent variables, i.e. inlet air temperature, varied from 153.79ºC to 196.21ºC and maltodextrin concentration, from 4.17 to 9.83 per cent. The responses were moisture content, bulk density, solubility, vitamin C, ΔE and L value.

Findings

The second-order polynomial model fitted for moisture content, bulk density, solubility, vitamin C, ΔE and L value was highly significant (p < 0.001) for each response. The inlet air temperature showed maximum influence on moisture content, bulk density, solubility and vitamin C, whereas the maltodextrin concentration showed maximum influence on bulk density, solubility, ΔE and L value. The predicted values were attained as moisture 4.90 per cent, bulk density 0.35g/ml, solubility 89.11 per cent, vitamin C 91.06mg/100g, ΔE 31.03 and L 87.78. The recommended optimum spray drying conditions were inlet air temperature and maltodextrin concentration of 166.64°C and 9.26 per cent, respectively.

Originality/value

Spray drying of the underused Indian fruit ber has enhanced its utility. Ber powder can further be used as an instant beverage, in sweets, as a flavoring agent and in soft drinks.

Citation

Pandey, S., Poonia, A. and Rai, S. (2019), "Optimization of spray drying conditions for the production of quality ber (Zizyphus mauritiana Lamk.) fruit powder", Nutrition & Food Science, Vol. 49 No. 6, pp. 1088-1098. https://doi.org/10.1108/NFS-12-2018-0339