To read this content please select one of the options below:

Evaluating fabrics produced by blending hollow fibres and bamboo with cotton/polyester wastes using the Kawabata system

Amal Mohamed El-Moursy (Department of Textile Technology, Faculty of Technology and Education, Beni-Suef University, Beni-Suef, Egypt)
Zeinab Mohmed Abdel Mageid (Department of Clothing and Knitting Industrial Research, Textile Research and Technology Institute, National Research Centre, Giza, Egypt)
Manar Yahia Ismail Abd El-Aziz (Department of Clothing and Knitting Industrial Research, Textile Research and Technology Institute, National Research Centre, Giza, Egypt)
Nour Asser (Department of Spinning, Weaving, and Knitting, Faculty of Applied Arts, Damanhour University, Damanhour, Egypt, and)
Osama Hakeim (Department of Dyeing, Printing, and Intermediate Auxiliaries, Textile Research and Technology Institute, National Research Centre, Giza, Egypt)

Research Journal of Textile and Apparel

ISSN: 1560-6074

Article publication date: 11 July 2023

101

Abstract

Purpose

Wearing clothes requires specifications for feeling comfortable, derived from the fibres, fabrics and finishing properties. This study aims to deal with the effect of economic blends containing hollow fibres, bamboo and cotton/polyester waste on the mechanical properties of the produced fabrics and the appropriate end use.

Design/methodology/approach

This research included two blends: one consisted of cotton/polyester wastes blended with bamboo and the other to which Chorisia fibres were added. Two weft counts 10,6/1 Ne were made from each blend, which were used to produce four fabric samples (S1 Chorisia-free and S2 with Chorisia); additionally, another two samples were dyed that contain Chorisia (S3) from each count. The six samples were tested by Kawabata Evaluation System (KES).

Findings

The samples gave a good total hand value (THV) for use as men's winter suits, where the thicker count 6/1, with and without Chorisia had better properties, also both counts 6, 10/1 with dye. The hollow fibres affected the fabrics’ properties, including thickness, shear, bending, thermal conductivity and weight. Both blends had a positive effect on THV.

Research limitations/implications

Cotton/polyester waste, Chorisia and bamboo fibres were tested, and 2% Remazol Yellow GNL dye was used.

Practical implications

The ratio of blending, weft counts and dye affected the fabric’s properties, with consequences for the use of the Kawabata system and its applications.

Social implications

The fabrics used in this research may be considered to be economical and have good THV.

Originality/value

The study proved the usefulness of fabrics made of two blends. The Chorisia component may be seen as a good alternative to cotton fibres to reduce the cost of producing high-consumption winter suit fabrics.

Keywords

Acknowledgements

This paper is based upon work supported by Science, Technology and Innovation Funding Authority [STDF] under grant number 33377, Call 7, Demand-Driven Projects [STDF-DDP], Development and Innovation Grants.

Citation

El-Moursy, A.M., Abdel Mageid, Z.M., Abd El-Aziz, M.Y.I., Asser, N. and Hakeim, O. (2023), "Evaluating fabrics produced by blending hollow fibres and bamboo with cotton/polyester wastes using the Kawabata system", Research Journal of Textile and Apparel, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/RJTA-01-2023-0005

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles