An algorithm for extracting STL model from axisymmetric ring element mesh

Abstract

Purpose

The purpose of this paper is to use rapid prototyping (RP) technology to build physical models based on axisymmetric finite element (FE) simulation deformation results. To this end, an algorithm which extracts stereolithography (STL) model from axisymmetric ring element mesh is developed and realized by MATLAB programming.

Design/methodology/approach

The algorithm first identifies boundary element edges, which compose the contour(s) of an axisymmetric ring FE mesh. Then, the identified contour edges are around the symmetry axis revolved a specific angle, at certain intervals according to certain approximate criterion, to generate new nodes to form a group of oriented triangles whose normal vectors conform to the right-handed rule. Finally, a completely closed STL model is obtained by necessary triangulation processing and rotation mapping based on original mesh.

Findings

It is validated that the extracted STL model is sound and the proposed algorithm is feasible, right and characterized by linear time complexity for extracting STL model from either triangular, quadrilateral, or mixed triangular/quadrilateral axisymmetric mesh.

Research limitations/implications

Color is important for expressing FE simulation results, which is not involved in STL model. Among the alternative data file formats, VRML representation is an applicable one that is complimentary to existing RP processes and suitable for color 3D printing. Based on the current work, coloring VRML model could be extracted from axisymmetric FE simulation results conveniently.

Originality/value

The study of this paper provides a RP-based materialized mode to characterize axisymmetric FE simulation deformation results, which is more intuitive and visible than the computer graphics-based visualization.

Citation

Tian, Z. (2013), "An algorithm for extracting STL model from axisymmetric ring element mesh", Rapid Prototyping Journal, Vol. 19 No. 6, pp. 407-417. https://doi.org/10.1108/RPJ-02-2012-0009