Prediction of viscosity of ternary tin-based lead-free solder melt using BP neural network

Abstract

Purpose

Viscosity is an important basic physical property of liquid solders. However, because of the very complex nonlinear relationship between the viscosity of the liquid ternary Sn-based lead-free solder and its determinants, a theoretical model for the viscosity of the liquid Sn-based solder alloy has not been proposed. This paper aims to address the viscosity issues that must be considered when developing new lead-free solders.

Design/methodology/approach

A BP neural network model was established to predict the viscosity of the liquid alloy and the predicted values were compared with the corresponding experimental data in the literature data. At the same time, the BP neural network model is compared with the existing theoretical model. In addition, a mathematical model for estimating the melt viscosity of ternary tin-based lead-free solders was constructed using a polynomial fitting method.

Findings

A reasonable BP neural network model was established to predict the melt viscosity of ternary tin-based lead-free solders. The viscosity prediction of the BP neural network agrees well with the experimental results. Compared to the Seetharaman and the Moelwyn–Hughes models, the BP neural network model can predict the viscosity of liquid alloys without the need to calculate the relevant thermodynamic parameters. In addition, a simple equation for estimating the melt viscosity of a ternary tin-based lead-free solder has been proposed.

Originality/value

The study identified nine factors that affect the melt viscosity of ternary tin-based lead-free solders and used these factors as input parameters for BP neural network models. The BP neural network model is more convenient because it does not require the calculation of relevant thermodynamic parameters. In addition, a mathematical model for estimating the viscosity of a ternary Sn-based lead-free solder alloy has been proposed. The overall research shows that the BP neural network model can be well applied to the theoretical study of the viscosity of liquid solder alloys. Using a constructed BP neural network to predict the viscosity of a lead-free solder melt helps to study the liquid physical properties of lead-free solders that are widely used in electronic information.

Citation

Wu, M. and Lv, B. (2020), "Prediction of viscosity of ternary tin-based lead-free solder melt using BP neural network", Soldering & Surface Mount Technology, Vol. 32 No. 3, pp. 173-180. https://doi.org/10.1108/SSMT-02-2019-0005