To read this content please select one of the options below:

Aptness of nano alumina (Al2O3) with high range water reducer-incorporated concrete

Mudasir Peerzada (Department of Civil Engineering, National Institute of Technology, Srinagar, India)
Khan Adnan (Department of Civil Engineering, SSM College of Engineering and Technology, Srinagar, India)
Basrah Bilal (Department of Civil Engineering, SSM College of Engineering and Technology, Srinagar, India)
Riyaz Janees (Department of Civil Engineering, SSM College of Engineering and Technology, Srinagar, India)
Bazila Qazi (Department of Civil Engineering, SSM College of Engineering and Technology, Srinagar, India)
Naqash Ahmed Javed (Department of Civil Engineering, National Institute of Technology, Srinagar, India)

World Journal of Engineering

ISSN: 1708-5284

Article publication date: 17 March 2022

Issue publication date: 4 July 2023

110

Abstract

Purpose

The purpose of this paper is to study the effect of nano alumina (Al2O3) on the properties of fresh concrete, hardened concrete and microstructure of concrete incorporated with high range water reducer (HRWR). This initiative was taken to improve characteristic properties of concrete using nano alumina because nano alumina can be easily be manufactured from a scrap of industrial aluminum products, so its incorporation in concrete will not only reduce industrial aluminum waste but will also change the morphology of concrete at the microstructural level.

Design/methodology/approach

To accomplish the objectives of the research, four different concrete mixes with the constant water–cement ratio (W/C) and superplasticizer (SP) content 0.4 and 0.6% by weight of cement, respectively, were prepared, whereas nano alumina content was altered by 0.3% and 0.4% by weight of cement. Fresh property of concrete was analyzed by using slump cone test, whereas hardened properties of concrete were analyzed through compression test and flexural strength test. The interaction of nano alumina with concrete composite was evaluated using an X-ray diffraction test.

Findings

It was observed that 0.6% superplasticizer by weight of cement increased workability by 22% but with the addition of 0.3%, nano alumina by weight of cement workability decreased by 31%. Compressive strength increased by 4.88% with the addition of 0.6% superplasticizer but with the addition of 0.3% nano alumina by weight of cement compressive strength increased by 18.60%. Also, flexural strength increased by 1.21% with the addition of 0.6% superplasticizer by weight of cement but with the addition of 0.3% nano alumina by weight of cement flexural strength increased by 8.76%. With the addition of superplasticizer, alite and belite phases remained un-hydrated but with the addition of nano alumina alite phase was hydrated while belite phase was un-hydrated. The size of belite crystals in mixes having nano alumina was less than that of mix having 0.6% superplasticizer. Also with the addition of nano alumina, a calcium aluminum silicate phase was formed which was responsible for the increment of strength in mixes having nano alumina.

Originality/value

Incorporation nano alumina (Al2O3) in concrete will not only reduce industrial aluminum waste but will also reduce CO2 emission. Nano alumina (Al2O3) also changes morphology of concrete at micro structural level.

Keywords

Acknowledgements

Authors received no funds but acknowledge the mutual help and technical support from Tribology, Concrete and Structural engineering laboratories of NIT Srinagar J&K India.

Citation

Peerzada, M., Adnan, K., Bilal, B., Janees, R., Qazi, B. and Javed, N.A. (2023), "Aptness of nano alumina (Al2O3) with high range water reducer-incorporated concrete", World Journal of Engineering, Vol. 20 No. 4, pp. 746-753. https://doi.org/10.1108/WJE-01-2022-0020

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles