Performance evaluation of newly designed nozzle on abrasive jet machining characteristics of laminated composites
ISSN: 1708-5284
Article publication date: 8 June 2021
Issue publication date: 20 June 2022
Abstract
Purpose
The purpose of the study is to machine the composites at lower machining time with higher accuracy without causing delamination.
Design/methodology/approach
Abrasive jet machining is the technology appropriate for machining composite materials to obtain good dimensional accuracy without causing de-lamination. The central composite design was followed in deciding the number of experiments to be carried out.
Findings
The influence of abrasive jet machining process parameters on machining time, material removal rate (MRR) and kerf characteristics were investigated. The experimental results proved the newly designed internal threaded nozzle increased MRR, thereby reducing the machining time.
Originality/value
Machining of glass fibre reinforced polymer (GFRP) is one of the challenging tasks given its non-linear and in-homogeneous properties. In this investigation, newly developed threaded and unthreaded nozzles in machining were used for making holes on the GFRP composites.
Keywords
Acknowledgements
The authors declare no conflict of interest.
Citation
Balasubramanian, M. and Madhu, S. (2022), "Performance evaluation of newly designed nozzle on abrasive jet machining characteristics of laminated composites", World Journal of Engineering, Vol. 19 No. 4, pp. 546-558. https://doi.org/10.1108/WJE-10-2020-0513
Publisher
:Emerald Publishing Limited
Copyright © 2021, Emerald Publishing Limited