Simulating flowfield around helicopters

Citation

(2003), "Simulating flowfield around helicopters", Aircraft Engineering and Aerospace Technology, Vol. 75 No. 6. https://doi.org/10.1108/aeat.2003.12775faf.006

Simulating flowfield around helicopters

Simulating flowfield around helicopters

Keywords: Helicopters, Simulation, Aerodynamics

Computational fluid dynamics (CFD) has for many years been at the heart of helicopter design, with steady state simulation of aerodynamics providing engineers with more design guidance than could ever be achieved from wind tunnel experiments alone. With deeper understanding of the complex flows involved, it has become clearer that new techniques are required to fully capture the true nature of the flow field. The key lies in developing flow field simulation technology to handle the transient effects associated with rotor motion, including, for example, pitching of the blades.

The Defence Aeronautics Programme at the Council for Scientific and Industrial Research (CSIR), in South Africa has been a key technology solution provider to the South African Air Force (SAAF) for the past five decades. Considerable resources have been dedicated to Helicopter Technology in particular. The programme's CFD modeling and simulation, aeroelasticity, advanced structures and wind tunnel facilities, are being used to advance aeronautical technology relevant to helicopters in support of helicopter acquisition, operations, aerodynamic analysis and optimisation, flight simulator development, hardware development and improvements.

The CSIR's Defence Aeronautics CFD group is directing substantial effort in simulating the flow field around helicopters in hover and forward flight. At this stage CFD models of two well-known helicopters, viz. Rooivalk Combat Helicopter and the Oryx Transport and Medium Lift Helicopter, have been developed and simulation results have already been used in the design and countermeasure environments. The CD adapco Group's CFD code, STAR-CD, and in particular its automatic meshing tool, pro-am, are invaluable tools in the development of this technology.

If one considers the nature of the flow field around a helicopter in hover or trimmed forward flight and the complex geometry of the entire aircraft, one can understand the extreme demands placed on the CFD software and hardware. While it is possible to simulate a hovering helicopter using steady state simulation techniques, a transient simulation is required for the helicopter in trimmed forward flight as each rotor blade pitches as it rotates around the rotor shaft through the helicopter azimuth. Thus, the motion of each blade has to be specified and controlled individually as the simulation proceeds. Moreover, the tail rotor movement must be specified independently from that of the main rotor. STAR-CD's advanced mesh movement capability enables one to model such a case.

The fuselages are complex, and multi-block mesh generation techniques proved time- consuming and inefficient. Automatic meshing comes to the rescue! Solid models were first generated in SolidWorks and surfaces were wrapped around the solid fuselages using a STAR-CD plug-in. These surfaces were conditioned and modified to an acceptable level using pro-am's surface tools. Thereafter, the original surface was expanded by an offset distance to create a subsurface. Using alternating cell classification and local refinement in pro-am, an efficient trimmed- cell mesh, external to the subsurface, was created. The sub-layer, a layer of cells normal to the helicopter surface, fills the space between the original surface and the subsurface, allowing more control over the cell quality adjacent to the helicopter surface and improving turbulence modeling and viscous drag prediction.

Rotor collective, lateral and longitudinal rotor tilt, lateral and longitudinal cyclic settings, and rotor geometry are among the various parameters required to model the main and tail rotors. These parameters, together with the fuselage attitude, are extracted from dynamic flight simulations using CAMRAD J/A and entered into a FORTRAN code that automatically generates the independent rotor grids using block structures, and performs the integration with the fuselage grid. A mesh movement script, with the lateral and longitudinal cyclic pilot inputs, controls the pitch attitude of each main rotor blade while being rotated around the rotor centre through the helicopter azimuth. The same script rotates the tail rotor.

The modeling of the fuselage and the main rotor is being validated with results from tests conducted in the low speed wind tunnel and 7m wind tunnel at the Defence Aeronautics Programme. This intense validation exercise is planned to take place over the next 2 years with funding from the SAAF and Armscor. However, this CFD Groups' efforts to date have provided invaluable information and insight for the South African Air Force.

Glen Snedden, Head of CFD at CSIR, says "Pro-am's tools for meshing complex aerodynamic bodies coupled with the moving mesh capability of STAR-CD have made it possible for us to achieve excellent results in modeling the flowfield complexities of a helicopter with moving main and tail rotors, even when our hardware resources were more limited."

Details available from: CD adapco Group. Tel: +1 631 549 2300 ext.113.