Citation
(2007), "Single cycle turn milling with Y-axis crossfeed from Hyundai-Kia SKT 210 SY", Aircraft Engineering and Aerospace Technology, Vol. 79 No. 4. https://doi.org/10.1108/aeat.2007.12779dab.005
Publisher
:Emerald Group Publishing Limited
Copyright © 2007, Emerald Group Publishing Limited
Single cycle turn milling with Y-axis crossfeed from Hyundai-Kia SKT 210 SY
Single cycle turn milling with Y-axis crossfeed from Hyundai-Kia SKT 210 SY
Fitted with a VDI 40, 12 station all- driven turret having ±40mm Y-axis feed with 16mm tool shank size and M20 tapping capability, the latest SKT 210 SY Integrated Turn/Mill Center from Hyundai-Kia has been developed for cost-effective single hit cycles for components produced from bar stock up to 65mm diameter.
Now part of the ever-growing stable of impressive turn/mill centres from C. Dugard of Hove, this Y- and C-axis subspindle machine has a maximum turning diameter of 240mm diameter at the 15kW, 4,000revs/min main spindle that carries an 8in. chuck as standard. The subspindle, fitted with a 5in. chuck, is powered by a 3.7kW motor giving 6,000revs/min and a rapid traverse rate of 36m/min. Through bore diameters are 78mm for the main spindle and 43mm for the subspindle.
In order to support milling and drilling cycles at both the main and subspindle positions, 0.0018 spindle indexing is standard and a manual Q- Setter tool setting probe is fitted to speed toolchange and machine setting. Axis strokes are 220mm in X, 550mm in Z, 750mm in ZB and ^40mm in Y. The driven tools are powered by 2.7kW motor and the machine controlled by a Fanuc 18i-TB unit.
Details available from: C Dugard Machine Tools. Tel: +44 (0) 1273 732286; web site: www.dugard.com