Float Construction and Repair: The Process of Building a Seaplane Float Described, with Hints on Replacing Damaged Parts

Abstract

THIS article is intended as a continuation of the previous one on hull construction. The blue‐print drawings, as before, have to be developed full‐scale on the scrive board, which must be large enough to carry all the lines without any overlapping.

Citation

(1932), "Float Construction and Repair: The Process of Building a Seaplane Float Described, with Hints on Replacing Damaged Parts", Aircraft Engineering and Aerospace Technology, Vol. 4 No. 10, pp. 247-249. https://doi.org/10.1108/eb029600