Flying controls
Aircraft Engineering and Aerospace Technology
ISSN: 0002-2667
Article publication date: 1 September 1971
Abstract
THE A300B employs fully powered flying controls, operated by hydraulic power, with no reversion to manual control. The hydraulic power supplies are ‘triplexed’ to the banks of three jacks at each primary control surface. Jack sizes are chosen so that full control over the flight envelope is available with only two hydraulic systems working. Should a further system have to be shut down for any reason, the one remaining set of jacks will still provide sufficient power for control of the aircraft, including landing.
Citation
(1971), "Flying controls", Aircraft Engineering and Aerospace Technology, Vol. 43 No. 9, pp. 22-23. https://doi.org/10.1108/eb034808
Publisher
:MCB UP Ltd
Copyright © 1971, MCB UP Limited