Auto‐Scan — A New Dimension in 3D Scanning

Abstract

THE measurement of complex contoured surfaces has meant different problems for different manufacturers. These differences have principally arisen out of the developments of rival companies; each company establishing its own method of design and verification via many and varied inspection techniques. This is self‐evident in the different methods adopted for specifying contours of complex aerofoils, cams and turbine blades.

Citation

(1985), "Auto‐Scan — A New Dimension in 3D Scanning", Aircraft Engineering and Aerospace Technology, Vol. 57 No. 4, pp. 6-7. https://doi.org/10.1108/eb036094