To read this content please select one of the options below:

Modern antifouling compositions ‐ Part IV: Controlled release, less hazardous, low cost highly efficient antifouling compositions

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 1 September 1990

30

Abstract

Two sets of formulations based on three copolymer and three terpolymer systems involving tributyltin methacrylate(BTMA),methyl methacrylate(MMA) and acrylonitrile (AN) with variable tin contents of 7, 15 and 22% were prepared. There is only one varient in each formulation of the six prepared, that is the type of organotin polymer whether it is a copolymer or terpolymer of a definite tin content 7 or 15 or 22%. The binder mixture is a blend consisting of the organotin polymer, a vinyl copolymer and its external plasticizer and little amount of rosin. A moderate and fixed amount of cuprous oxide was introduced into all formulations as a supplementary toxin with organotin polymer. Leaching rates of micro amounts of copper and tin were determined. Panel exposure test in the sea was performed at Port Said. Best antifouling efficiency was obtained from formultions containing organotin copolymer or terpolymer of 22% tin content and that containing organotin copolymer of 15% tin.

Citation

Abd El‐Malek, M.M., Messiha, N.N. and Ayoub, M.M.H. (1990), "Modern antifouling compositions ‐ Part IV: Controlled release, less hazardous, low cost highly efficient antifouling compositions", Pigment & Resin Technology, Vol. 19 No. 9, pp. 7-11. https://doi.org/10.1108/eb042763

Publisher

:

MCB UP Ltd

Copyright © 1990, MCB UP Limited

Related articles