Some Fundamental Aspects of UV Laser Direct Imaging

Abstract

Photoresist imaging traditionally uses silver halide or diazo based phototools for contact exposure to an actinic UV light source. By contrast, laser direct imaging uses digital imaging data to control a laser beam scanner to write directly on to the photoresist, therefore eliminating the need for phototools. In the past, even though the benefit of a UV system was recognised, laser direct imaging was mainly limited to the use of a visible laser as early UV lasers were low in power, unreliable and expensive. So far, no visible systems have gained commercial recognition because of the inherent deficiencies of the visible system. Recent advantages in UV laser equipment and UV sensitive photoresist have now made UV laser direct imaging a viable alternative to traditional contact imaging. As new UV laser imaging systems start to emerge, interest and attention are also growing among printed circuit board manufacturers. This paper discusses various attributes of a UV laser direct imaging system and fundamental differences in photophysics between laser direct imaging and conventional UV imaging.

Citation

Choi, J.H. (1995), "Some Fundamental Aspects of UV Laser Direct Imaging", Circuit World, Vol. 21 No. 4, pp. 18-21. https://doi.org/10.1108/eb044045