Fundamentals of Cutting Tool Lubrication
Abstract
WHEN METALS ARE SHEARED or “cut” a compressive force of high intensity is applied to the metal by the cutting tool. The metal crystals are subjected to this force and the resulting stresses cause certain crystals to slip or flow in various directions along planes of slippage, the direction of slip normally being along planes of greatest atom density.
Citation
Norris, R.H. and Lownes, E.J. (1959), "Fundamentals of Cutting Tool Lubrication", Industrial Lubrication and Tribology, Vol. 11 No. 11, pp. 26-35. https://doi.org/10.1108/eb052590
Publisher
:MCB UP Ltd
Copyright © 1959, MCB UP Limited