SKF makes multiple lubrication easy

Citation

(2002), "SKF makes multiple lubrication easy", Industrial Lubrication and Tribology, Vol. 54 No. 4. https://doi.org/10.1108/ilt.2002.01854dad.013

SKF makes multiple lubrication easy

SKF makes multiple lubrication easyKeywords: SKF, Lubrication

SKF's SYSTEM Multipoint is a new, automatic lubricator for multiple grease lubrication points. It can automatically lubricate each point simultaneously with the correct amount of lubricant and therefore, removes human error and neglect in installations where multiple lubrication points prove to be time consuming and liable to be forgotten. With research showing that 36 percent of all bearings fail prematurely due to incorrect lubrication, SYSTEM Multipoint will facilitate longer bearing life and increased uptime (Plate 9).

SYSTEM Multipoint's high-pressure capability, of 40bar/600psi, allows grease to be dispensed at the high rates required in multiple bearing applications. Feed lines can be run to 5m in length, with up to eight lines simultaneously connected to the lubricator. An electronic alarm function warns of blocked feed lines and empty cartridges, and a machine steering function stops the lubricator operating when a machine is not running.

Also included with SYSTEM Multipoint is Dialset, a re-lubrication calculation program. Dialset automatically calculates the correct grease-dispensing rate for each bearing to prevent both over and under lubrication.

Plate 9 SYSTEM Multipoint is SKF's new, automatic lubricator for multiple grease lubrication points

As a compact, easy to install unit, SYSTEM Multipoint can be fitted without the assistance of a technician and is supplied ready for use with all accessories, including 100m of tubing. It is supplied, tested and approved for use with all SKF greases and uses standard, SKF 420ml grease cartridges.

SYSTEM Multipoint can be used with ball, roller, slewing and plain bearings, chains, linear guidance systems and gears. It is particularly suitable for applications involving pump and motor combinations, fans, cranes, conveyors, crushers, mixers, lifts and elevators.

For further information contact: Phil Burge, SKF (UK) Limited, Sundon Park Road, Luton, Bedfordshire LU3 3BL, UK. Tel: +44 1582 490049; Fax: +44 1582 848091; E-mail: phil.burge@skf.com