HIPERAX thrust bearings made using VICTREX PEEK

Industrial Lubrication and Tribology

ISSN: 0036-8792

Article publication date: 20 June 2008

296

Citation

(2008), "HIPERAX thrust bearings made using VICTREX PEEK", Industrial Lubrication and Tribology, Vol. 60 No. 4. https://doi.org/10.1108/ilt.2008.01860dad.003

Publisher

:

Emerald Group Publishing Limited

Copyright © 2008, Emerald Group Publishing Limited


HIPERAX thrust bearings made using VICTREX PEEK

Article Type: New products From: Industrial Lubrication and Tribology, Volume 60, Issue 4

Thrust bearings designed and developed by US-based Waukesha Bearings Corporation implementing VICTREX PEEK polymer have proven successful after three years of continuous use. HIPERAX bearings (Figure 3) have been installed in wet wound heater lift pumps by Weir Engineering Services Ltd The bearings manufactured from Victrex PEEK 450FC30 are insert moulded onto a substrate by High Performance Mouldings of Nottingham, UK.

According to Dr Guy Pethybridge, Global Product Manager for Waukesha Bearings Corporation, “Waukesha saw the need to develop a thrust bearing solution that could handle high load capacity in water-lubricated applications. We developed the HIPERAX thrust bearing and decided to implement VICTREX PEEK into the design because of its unique set of excellent tribological properties and attributes. The combination of our design expertise and the properties and wear resistance of VICTREX PEEK polymer resulted in the development of HIPERAX thrust bearings. The HIPERAX bearings can support loads of up to 8MPa whilst running continuously in water at 65C.”

“VICTREX PEEK polymer bearings provide an alternative in both oil- lubricated applications and those lubricated by the process fluid. These bearings combine excellent surface properties with a high working temperature. In the conventional oil- lubricated environment, the polymer- faced bearing will run hotter than its metallic counterpart because of the low thermal conductivity of the material. In practice, this leads to thinner working oil films compared to metallic surfaced bearings, but, because of the improved surface properties of the polymer materials, the actual load capacity can be higher. The benefits of a polymer solution can be summarized as: higher operating temperatures up to 250ºC (480ºF); higher load capability; corrosion resistance when operating in process fluids; and high electrical resistivity (better than 109Ωm),”

“It is clear that the designers of the next generation of pumps have many options available to cope with the wide range of pump operating conditions. Our HIPERAX thrust bearings made with VICTREX PEEK are still in use after three years of operation with minimal wear, despite the presence of system debris such as rust, which certainly proves polymers offer significant benefits in the right circumstances,” concluded Dr Pethybridge.

Victrex plc is the leading manufacturer of high-performance materials, including VICTREX® PEEK polymer, VICOTE® Coatings and APTIV™ film. These materials are used in a variety of markets and offer an exceptional combination of properties to help processors and end-users reach new levels of cost savings, quality, and performance.

The company is headquartered in the UK. Invibio®, Victrex's biomaterials business, provides access to specialized products and services for medical device manufacturers. Victrex Japan, Inc. is a wholly owned subsidiary of Victrex plc.

For more information visit: www.victrex.com or www.victrex.mobi

Figure 3 The HIPERAX thrust bearing

Related articles