Table of contents
A multi‐point corrosion monitoring system applied in a 1,300 MW coal‐fired boiler
K.A. Davis, T.M. Linjewile, J. Valentine, D. Swensen, D. Shino, J.J. Letcavits, R. Sheidler, W.M. Cox, R.N. Carr, N.S. HardingCombustion modifications to minimize NOX emissions have magnified the importance of waterwall corrosion in coal‐fired boilers. The physics and chemistry controlling corrosion…
736
Microbiologically induced corrosion of copper intrauterine devices by Enterobacter sp. in a synthetic intrauterine medium
B. Mónica Carrillo, S. Benjamín Valdez, Lucien Vevela, L. Tezozomoc Pérez, O. Lidia Vargas, W. Michael SchorrMicrobiologically induced corrosion of copper intrauterine devices “TCu380A” and “Nova T” by Enterobacter sp. in a synthetic intrauterine medium was investigated. The corrosion…
769
Cyclic oxidation behaviour of a Ni‐Mo‐Cr alloy at 800°C
A. Ul‐Hamid, H.M. Tawancy, A.I. Mohammed, S.S. Al‐Jaroudi, N.M. AbbasThe oxidation behaviour of a wrought Ni‐Mo‐Cr alloy was studied under thermal cyclic conditions in air at 800°C for exposure periods of up to 1,000 h. The morphologies…
879
Performance evaluation of different hardener for epoxy resin
S. Sankar, G. Paruthimal Kalaignan, T. Vasudevan, M. SelvarajCoatings with outstanding chemical and physical properties can be obtained from two‐pack formulations without stoving. The epoxy resin was cured with different amine‐based…
545
ISSN:
0003-5599Online date, start – end:
1954Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Yu Yan