Anti-Corrosion Methods and Materials: Volume 64 Issue 2

Influence of sour oil on calcareous deposit nucleation

Morteza Hoseinieh, Taghi Shahrabi, Morteza Farrokhi Rad, Bahram Ramezanzadeh

The aim of this paper is to investigate the influence of sour crude oil contaminant on the calcareous scale deposition under cathodic protection of carbon steel in artificial…

Inhibitive action of tara tannin in rust converter formulation

Santiago Flores Merino, Juan José Caprari, Luis Vasquez Torres, Luis Figueroa Ramos, Antonella Hadzich Girola

The purpose of this paper is to study the ability of commercial tara powder to convert rust into iron tannate and evaluate their use as raw material for the formulation of water…

Experimental study on under-deposit corrosion and its inhibition using electrochemical methods and electronic coupon technique

Yunze Xu, Yi Huang, Limin He, Fei Yang, Xiaona Wang

In this study the aim was to investigate under-deposit corrosion (UDC) behavior and the action effects of amino trimethylene phosphonic acid (ATMP) in the oxygen-contained…

Process and performance of electroless nickel plating on AZ91D magnesium alloy

Zhongcai Shao, Feifei Zhang, Zhiqiang Cai, Rong Hu

The purpose of the investigation was to research the best process of electroless nickel (EN) plating on AZ91D magnesium alloy and the performance of EN plating coating.

Pitting inhibition in fiber dyeing solutions by two oxyanions

A. Yilmaz

Pitting inhibition efficiency of SO₄⁻ and NO₃⁻ on AISI 316L stainless steel in contact with Cl⁻-containing fiber dyeing solutions together with the influence of the anions on…

Data-driven modeling of corrosion and scale deposition rate in economizer

Amrita Kumari, S.K. Das, P.K. Srivastava

The aim of this paper is to study the effect of the parametric sensitivity of all critical parameters of feed water and other operating variables on the corrosion rate and oxide…

Chemical conditioning and monitoring to control and minimize chemistry-related damages in Heller dry cooled combined cycle power plants

Omid Pourali, Hashem Ghasemi Kadijani, Farideh Mohammadi Khangheshlaghi

An effective chemical conditioning technique was successfully tested and investigated to control and minimize the chemistry-related damages within mixed metallurgy steam and water…

Inhibitor concentration on the corrosion behaviour of X70 steel in CO2 environments

Dongyang Li, Lining Xu, Shaoguang Feng, Minxu Lu

The purpose of this study is to investigate the corrosion behaviour of X70 steel in the presence and absence of various concentrations of inhibitor N-(2-o-Tolyl…

Pitting behavior and mechanism caused by Ca-Al-O-S composite inclusions in low-alloy steels

Fan Yi, Wang Qingfeng, Yang Wenxiu

The purpose of this study is to study the pitting caused by Ca-Al-O-S composite inclusions of low-alloy steel in 3 Wt.% NaCl solution and 0.01M NaHSO3 solution.

The self-healing evaluation of microcapsule-based epoxy coatings applied on AA6061 Al alloy in 3.5% NaCl solution

Mehdi Shahidi Zandi, Majdeh Hasanzadeh

The aim of this work is to investigate the self-healing performance of epoxy coatings containing microcapsules. The microcapsule-based coatings were applied on AA6061 Al alloy and…

The protection of TDPA deposited from mixed solutions with different water/ethanol ratios for aluminum alloy against corrosion in NaCl solution

Qu Jun-e, Chen Geng, Wang Hai-ren, Cao Zhi-yong

The purpose of this paper is to investigate the effect of water content of assembly solution on the adsorption behavior and corrosion protection performance of…

Detection of SCC on 304 stainless steel in neutral thiosulfate solutions using electrochemical noise based on chaos theory

Ru Zhao, Da-Hai Xia, Shi-Zhe Song, Wenbin Hu

This paper aims to investigate the stress corrosion cracking (SCC) process of sensitized 304 stainless steel during the slow strain rate test by using the electrochemical noise…

Effects of cold deformation on electrochemical corrosion behaviors of 304 stainless steel

Jiamei Wang, Le Fu Zhang

The purpose of this study was to investigate the effects of deformation-induced martensite on electrochemical corrosion behaviors of 304 austenitic stainless steel in a simulated…