Anti-Corrosion Methods and Materials: Volume 65 Issue 5

Electrodeposition of Pr-Mg-Ni ternary alloy films from the choline chloride-urea ionic liquid and their corrosion properties

Miao Li, Bi Qing Chen, Min He, Tongtong Xiong, Lixia Gao

This paper aims to obtain rare earth magnesium alloy with good adhesion and corrosion resistance.

Flexural performance of TRC-strengthened RC beam under chloride environment

Yin Shi-ping, Yu Yulin, Yunping Xi

Textile reinforced concrete (TRC) has excellent bearing capacity and anti-crack and corrosion resistance capacity, which are suitable for strengthening concrete structure under…

Subsection corrosion inhibition of acidic-oxidized polymer degradant in offshore oil field

Yanhua Zhu, Liqiang Zhao, Pingli Liu, Ming Yang

This paper aims to introduce a method to reduce corrosion caused by acidic-oxidized polymer degradant through subsection injection with different inhibitor.

Reinforcement corrosion research based on the linear polarization resistance method for coral aggregate seawater concrete in a marine environment

Bo Da, Hongfa Yu, Haiyan Ma, Zhangyu Wu

This paper aims to reduce the cost, limit the time and increase raw material source availability, coral aggregate seawater concrete (CASC) composed of coral, coral sand, seawater…

Long-term monitoring of zinc corrosion behavior in typical hot and dry atmosphere environment in Turpan, China

Chunhui Kang, Decheng Kong, JiZheng Yao, Chunyun Guo, Li Wang, K. Xiao, C.F. Dong

This paper aims to investigate the corrosion behavior of zinc in a typical hot and dry atmosphere. It proposes the dynamic corrosion for different exposure periods. Results can…

Innovative approach for suppressing corrosion of SS304 steel in saline water environment

Vivek Anand A., Arumugam V., Jayalakshmi S., Arvind Singh R.

The failure of structures and components made of SS304 steel because of corrosion in the presence of saline water environment is still an unsolved issue across the globe…

Effect of cooling rate after heat treatment on pitting corrosion of super duplex stainless steel UNS S 32750

Byung-Hyun Shin, Junghyun Park, Jongbae Jeon, Sung-bo Heo, Wonsub Chung

In this study, super duplex stainless steel (SDSS) was heat-treated. The purpose of this study is to assess the effect of the cooling rate after heat treatment on the pitting…

Trivalent chromium electrodeposition using a deep eutectic solvent

Vyacheslav Protsenko, Lina Bobrova, Felix Danilov

This paper aims to investigate the electrolytic deposition of corrosion-resistant chromium coatings from a trivalent chromium plating bath based on deep eutectic solvent, a new…

Evaluation of environmentally friendly inhibitor for corrosion of mild steel in phosphoric acid solution: unconventional approach

Khalid Rashid, Anees Khadom

The purpose of this study is to investigate the corrosion inhibition of mild steel alloy in 2 M H₃PO₄ solution by the pomegranate peel extract as a friendly inhibitor was studied…