Rapid Prototyping Journal: Volume 18 Issue 3
Strapline:
The international journal for research on additive manufacturing and 3D printingTable of contents
Distortion modeling of SL parts by classical lamination theory
Morteza Vatani, Farshad Barazandeh, AbdolReza Rahimi, Amir Sanati NezhadIn stereolithography (SL), the total exposure absorbed by photopolymer is variable and is a function of height. This phenomenon causes heterogeneous properties and develops…
Design, fabrication, and evaluation of negative stiffness elements using SLS
Lia Kashdan, Carolyn Conner Seepersad, Michael Haberman, Preston S. WilsonRecent research has shown that constrained bistable structures can display negative stiffness behavior and provide extremal vibrational and acoustical absorptive capacity. These…
Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks
Igor Yadroitsev, Ina Yadroitsava, Philippe Bertrand, Igor SmurovProperties of the parts manufactured by selective laser melting (SLM) depend strongly on the each single laser‐melted track and each single layer, as well as the strength of the…
Patient‐specific reconstruction with 3D modeling and DMLS additive manufacturing
Mika Salmi, Jukka Tuomi, Kaija‐Stiina Paloheimo, Roy Björkstrand, Markku Paloheimo, Jari Salo, Risto Kontio, Karri Mesimäki, Antti A. MäkitieThe purpose of this paper is to develop a workflow for 3D modeling and additive manufacturing (AM) of patient‐specific medical implants. The comprehensive workflow consists of…
FDM models and FEA in dysplastic hip
Ratnadurai Dhakshyani, Yusoff Nukman, Abu Osman Noor AzuanThe purpose of this paper is to examine the use of fused deposition modelling (FDM) models and finite element analysis (FEA) related to dysplastic hip orthopaedic surgery.
Three‐dimensional multi‐material electromagnetic band‐gap structure: design, fabrication and property studies
Kun Sun, Dichen Li, Haihua Wu, Minjie Wang, Xiaoyong TianThe purpose of this paper is to bring up the concept of multi‐material electromagnetic band‐gap structure (EBGs) and develop a method for its fabrication. Meanwhile, its microwave…
Preliminary fabrication of thin‐wall structure of Ti6Al4V for dental restoration by electron beam melting
Wahyudin P. Syam, Huda A. Al‐Shehri, A.M. Al‐Ahmari, Khalid A. Al‐Wazzan, M.A. MannanThe purpose of this paper is to investigate the potential application of electron beam melting, as a layered manufacturing process, to fabricate dental coping of metal‐ceramic…
Effect of selective laser melting layout on the quality of stainless steel parts
S. Dadbakhsh, L. Hao, N. SewellSelective laser melting (SLM) is increasingly used for the manufacture of end‐use metal tools and parts, requiring the careful identification of a range of appropriate process…
ISSN:
1355-2546Online date, start – end:
1995Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Ian Gibson